In this episode

  • A garden stand built from large structural posts from the local timber merchant
  • Protective bitumen paint on every surface of the stand
  • The rear door step raised in concrete so the door can be fitted outside for now
  • Exposed rebar primed before the reveals are rendered
  • Glass knocked out of the old frames, because the scrap man will not take them otherwise

Building a timber garden stand

This week I build a heavy duty timber garden stand and render the back door reveals. The stand is made from large structural posts from the local timber merchant. I assemble the frame inside the villa, measuring, marking and clamping each piece before screwing it together, working into the evening by head torch with one of the cats supervising.

Then the frame moves out onto the veranda. The legs are fixed to it with screws, checked with the level, and the whole stand is flipped upright onto the veranda floor.

A drive through Mazara del Vallo

One evening, a drive through Mazara del Vallo, along its lit streets and down its narrow alleys at night. My guide to which part of Sicily is right for you covers this corner of the island.

Raising the rear door step

At the rear entrance, I take the door out and raise the step with concrete, so the door can be fitted on the outside for now, the same way I refitted the front door in episode 67. That leaves the reveals clear to render before the plasterers arrive.

I dig out the dirt and loose stone at the threshold, mix the mortar and fill the base around the red conduit pipes, then level and smooth the fresh concrete with a trowel. A timber board goes over the top to protect it while it cures.

Shuttering the door reveals

Inside, I cut timber on the mitre saw and fix battens around the door opening with the spirit level and drill, to act as shuttering. Then I gather stone from the garden and mix mortar in the cement mixer, ready to pack the reveals. The approach is the one I have used on the windows since episode 62:

  1. Fix timber shuttering around the opening, level and plumb.
  2. Pack the deeper gaps in the reveals with stone and mortar.
  3. Prime any exposed rebar to protect it.
  4. Render the reveals with a trowel and float against the shuttering.

There is some exposed rebar, so I apply a coat of primer to protect it before the mortar goes on. Rusting rebar is what destroyed the old lintels in episode 59.

Rendering the back door reveals

With the shuttering in place, I apply the render around the door frame with the trowel and float. On the corridor side, I stand on a chair to reach above the frame and render around its edges. Once the shuttering comes off, the reveals have clean, straight edges ready for plaster.

Why do the reveals myself? When I got plastering quotes, the plasterers wanted €500 to €1,000 extra to do them, as I explained in episode 63, so every opening has been my job. It has been a lot of extra work I had not planned, but I think it will be worth it once the house is plastered. My practical guide to renovating in Sicily covers the prep that comes before plaster.

Rainwater on the veranda, and herbs

After the rain, water has pooled on the veranda, so I sweep and squeegee it off the tiles. Then I repot the herbs, lavender and rosemary among them, into pots for the garden, set them out on the veranda and the steps and water them in. They join the lavender I planted in episode 64. My article on growing your own food in Sicily covers what does well here.

Painting the garden stand

On the veranda, one of my boys helps me paint the garden stand. We pour the protective bitumen paint into a tray and work it over every part of the frame with small rollers and brushes, so the timber is sealed against the weather. The stand gets its timber slat top and is set in concrete in the front garden in episode 69.

Breaking glass out of the old frames

The scrap metal collector is coming back out, but he will not take the window frames while the glass is still in them. These are the frames I stacked up in episode 67, taken out of the bedroom, kitchen and bathroom openings in episodes 58 and 59, along with the old kitchen glass doors from episode 60. So, by the stone well, I smash and knock out the glass panes with a hammer and pick, then haul the bare frames to the scrap pile, ready for collection. My guide to buying, renovating and living off grid in Sicily covers the wider project.

Frequently asked questions

Will scrap dealers take old windows with glass in?

My local scrap metal collector would not take the old window frames while the glass was still in them, so I knocked all the glass out first.

How do you protect exposed rebar before rendering?

Where I found exposed rebar around my back door reveals, I applied a coat of primer to protect it before rendering over it with mortar.

How do you protect a timber garden stand outdoors?

I painted my stand, made from large structural timber posts, with protective bitumen paint, working it over every part of the frame with rollers and brushes.

Why raise a door step before plastering?

I raised my rear door step with concrete so the door could be fitted on the outside for now, leaving the reveals clear to render ready for plaster.

More episodes on the same job: Windows and doors · The garden and fruit trees