In this episode

  • A seized blind that had stayed shut since the day I bought the villa
  • Concrete lintels cracked by rusting, expanding rebar
  • Exposed water pipes protected with a cut plastic bottle
  • Timber frames and OSB sealing the kitchen and main bedroom openings
  • Three bird boxes with entrance reducers and recycled metal roofs

A blind that has never opened

This week I remove the kitchen window, and the failed lintels above it, then board the opening up from the outside. I have been looking forward to this one. Since I bought the villa last year, the blind on this window has never been open, because it is seized and rusted at the top. There was no way of opening it without cutting it out, so I always left it down for a little extra security and used the door instead. I am really interested to see all the extra light this window will let into the kitchen.

No fixings, and blown lintels

These windows are an absolute nightmare to get out. There are no fixings I can simply undo. The frame is sheet metal, encased in concrete. I presume that when these houses were built, the openings were left in the stonework, and these prefabricated units were slotted in and mortared around.

You can see it is all cracked at the top. From my experience with the kids' bedroom window in episode 58, that is because the concrete lintels have basically disintegrated over time. The rebar inside them has rusted, and as it rusts it expands and cracks the concrete. It is the same problem a local explained to me about the posts in episode 53.

It makes the job a bit sketchy. When I have been cutting the frames out with the angle grinder, the metal has been under load, and it has shattered a few cutting discs, so I am a bit on edge. Wish me luck. My article on what I wish I had known before buying covers hidden problems like these.

Cutting out the kitchen window

First, the exposed water pipes near the floor below the window need protecting. I cut open a plastic bottle on the workbench and fit it over them as a cover. Then the window comes out:

  1. Cut the metal frame and roller shutter tracks from the inside with the angle grinder.
  2. Chisel away the concrete and mortar encasing the frame edges with the SDS hammer drill.
  3. Lever the whole window and shutter assembly out of the opening with a crowbar.
  4. Clean out the loose rubble and chisel the masonry edges flat, including the old concrete sill.

The rubble goes into a bucket and out into the old stone planter at the base of the wall, then I sweep and shovel the rest from inside and out into the wheelbarrow.

Boarding up the kitchen window

In daylight, I build a timber batten frame around the outside of the opening with concrete fixings, then lift a full sheet of OSB over it. From the extension ladder, I screw the board to the frame with the impact driver and seal the top and side seams.

Too heavy, too awkward, not enough hands

Doing this renovation alone has changed more than just the building. It has changed how I think and how I approach challenges. So often, like with these windows, I am confronted with jobs that at first glance seem impossible. They are too heavy, too awkward, I do not have enough hands. Physically and logically, I am probably right.

But I have learned to shift my thinking. Instead of ruling the job out, I focus on the next small thing I can control, and somehow it gets done. When nobody is coming to help, mindset becomes everything. Every small win builds confidence. And if I have learned one thing through all of this, it is that most of my limits are not physical. They are mental.

The main bedroom window

Then I repeat the job on the larger main bedroom window, working by head torch into the night: grinding the frame, prising out the shutters and chiselling round the opening until it is clear. Outside, I pick up the fallen wood and debris below it while a black and white cat watches from the wall, and put some food out on the wall for the cat and a kitten.

With the opening measured, I cut timber framing and OSB in the workshop with the handsaw and circular saw, building a cover to fit the larger opening. Then it is up the ladder in the dark to screw it on and seal round the edges. Replacing the failed lintels starts in episode 60. My practical guide to renovating in Sicily covers why the windows come out before plaster.

Mum Cat teaches a lesson

One night, under the torch, Mum Cat brings a small rodent to her kitten on the boundary wall so it can practise catching. It is natural hunting behaviour, and may be upsetting for some viewers, but I wanted to include it, as Mum Cat has come a long way since her first litter and it felt like a rare moment to witness. You met her kitten Fang in episode 57.

Bird boxes with recycled metal roofs

To finish, something for the local wildlife. In the workshop I cut and drill the timber and assemble three bird boxes, fitted with entrance reducers. On the pallet bench I paint them with exterior wood stain, then add metal backing plates, perches and roofs cut from recycled sheet metal with the angle grinder, spraying the roofs black.

From the extension ladder, I fix all three high on the outside wall under the roofline with the hammer drill. They follow the bird feeder from episode 51, and in episode 77 sparrows are nesting in a box on the wall. My article on what it is really like living in rural Sicily has more on the wildlife around the villa.

Frequently asked questions

Why do concrete lintels crack?

At my villa the rebar inside the concrete lintels had rusted. As steel rusts it expands, and that cracked the concrete until the lintels had basically disintegrated.

How are old Sicilian metal windows fixed in?

Mine had no fixings to undo. The sheet metal frames were set into the openings and encased in concrete, so I had to cut and chisel them out.

Is it dangerous to cut out old window frames?

It can be. The metal in my frames was under load from the failing lintels, and it shattered a few angle grinder discs while I was cutting.

How do you protect exposed pipes during demolition?

I cut open a plastic bottle and fitted it over the exposed water pipes near the floor, to protect them while I cut and chiselled out the window above.

More episodes on the same job: Stone walls and lime · Windows and doors